E-mailinfo@wattool.com

Contact Us+8615820987168

Search
Banner

Tapping chucks of classification and maintenance

Aug 25, 2016

Tapping Chuck for use and maintenance:

1. installed Collet Cone and spindle first scrubbed clean, body cone is then mounted on the spindle, with a rubber hammer or gavel tap body end face to ensure a close, firm or taut.

2. depending on your machining needs, select the appropriate sleeve scrub clean and within the body into the hole, push the sliding CAP, sleeve Quartet into the square hole of body, clamping tool install clamps on sleeve, and can be processed.

3. If the tapping function, remember that nut first release, processing needs of torque depending on the tap, screw the nut (nut not too tight), tap does not slide.